Combined with FH series bio-based polyols, FH-31070 polyol is a 1,000 molecular weight high EO triol. FH-31070 is intended for the production of Viscoelastic foams with both TDI and MDI.
Typical properties
Appearance | clear liquid |
Hydroxyl number, mg KOH/g | 160-180 |
Water wt.% maximum | 0.10 |
Acid number, maximum | 0.015 |
Na & K, ppm maximum | 12 |
Color, APHA maximum | 50 |
Nominal functionality | 3 |
Nominal molecular weight | 1000 |
Density, lbs/gal @ 15°C | 9.23 |
Density, lbs/gal @ 25°C | 9.17 |
Density, lbs/gal @ 35°C | 9.03 |
Viscosity, cps @ 15°C | 487 |
Viscosity, cps @ 25°C | 262 |
Viscosity, cps @ 35°C | 154 |
Viscosity, cps @ 45°C | 97 |
Application
Foam
Storage and transportation
FH-31070 should be stored under dry conditions below 60°C.
200kg nonreturnable steel drums, 1000kg IBC tank made from HWHDPE.
Attention
These products can be used to prepare a variety of polyurethane products. Polyurethanes are organic materials and must be considered combustible.
This product is sold solely for use by industrial institutions. Refer to our Safety Data Sheet (SDS) regarding regulatory compliance, safety, hazards, spill procedures and disposal of this product. An SDS as well as additional information on Hug Chem polyols may be obtained by contacting us.
