Combined with bio-based polyol, FH-83152 is a polyester polyol. This product can be used in rigid isocyanurate boardstocks and low density, pour, spray, high density, and packaging polyurethane foams. It can also be used in urethane coatings, adhesives, sealants, and elastomers. It can also be used in UV/EB curable applications. This product exhibits excellent hydrolysis resistance, very good thermal stability and primary hydroxyl advantage. It may promote adhesion to a variety of metal and plastic substrates. This product has low viscosity for ease of blending and high aromatic content. It may improve solvent resistance and abrasion resistance.
Typical properties
Appearance | Clear, light yellow liquid |
Hydroxyl value, mg KOH/g | 300-330 |
Water content, max. % | 0.15 |
Acid number, max. mg KOH/g | 2.0-3.0 |
Color, Gardner, max | 3 |
Viscosity, cps, 40°C | 2750 |
Specific gravity, gm/cm3, 25°C | 1.23 |
Density, lbs/gallon, 25°C | 10.2 |
Functionality | 2.0 |
Application
Foam
Coating
Adhesive
Sealant
Safety considerations
Most FH series polyols generally present no significant hazard in use when simple precautions are followed. However, some FH series polyols are hazardous and before working with these systems it is necessary to understand the hazards involved in handling all of the components and to establish and follow safe work procedures. Material Safety Data Sheets, product literature and safe handling and storage information are available for the polyurethane components supplied by Hug Chem. Recommendations for handling, storage and disposal of any ingredient not furnished by Hug Chem should be acquired from the supplier.
Storage and Packaging
FH-83152 polyol is slightly hygroscopic and may absorb water. Containers should be kept tightly closed and protected from contamination with moisture and foreign materials, which can adversely affect processing. This product can become quite viscous at low temperatures. For ease of handling, storage temperatures between 15°C (59°F) and 60°C (140°F) are recommended.
The shelf life is twelve months after receipt of material by customer, when stored in sealed original containers under conditions stated above.
200kg nonreturnable steel drums, 1000kg IBC tank made from HWHDPE.
Health and safety information
Appropriate literature has been assembled which provides information concerning the health and safety precautions that must be observed when handling this product. Before working with this product, you must read and become familiar with the available information on its risks, proper use, and handling. This cannot be overemphasized. Information is available in several forms, e.g., safety data sheets and product labels. For further information contact Service of Hug Chem.
