Combined with FH series bio-based polyols, FH-S1470 polyol is a colored, sucrose/glycerine polyol. The high sucrose content with the high hydroxyl number has excellent compatibility with blowing agents and isocyanates for appliance, high density and general-purpose foam formulations. This polyol when combined with suitable flame retardants, yields foams having low smoke and good char-forming characteristics in the ASTM E-84 tunnel test.
Typical properties
Appearance | Colored liquid |
Hydroxyl number, mg KOH/g | 460 – 480 |
Water wt.% maximum | 0.10 |
Acid number, maximum | 0.030 |
Na & K, ppm maximum | 15 |
Color, APHA maximum | 80 |
Nominal functionality | 5.5 |
Nominal molecular weight | 665 |
Density, lbs/gal @ 25°C | 9.58 |
Specific gravity @ 25°C | 1.15 |
Specific gravity @ 40°C | 1.12 |
Specific gravity @ 60°C | 1.10 |
Viscosity, cps @ 25°C | 35000 |
Viscosity, cps @ 40°C | 10000 |
Viscosity, cps @ 60°C | 2600 |
Application
Foam
Storage and transportation
FH-S1470 should be stored under dry conditions below 60°C.
200kg nonreturnable steel drums, 1000kg IBC tank made from HWHDPE.
Attention
These products can be used to prepare a variety of polyurethane products. Polyurethanes are organic materials and must be considered combustible.
This product is sold solely for use by industrial institutions. Refer to our Safety Data Sheet (SDS) regarding regulatory compliance, safety, hazards, spill procedures and disposal of this product. An SDS as well as additional information on Hug Chem polyols may be obtained by contacting us.
