FH-32090 polyol is a high molecular weight, primary hydroxyl terminated triol. The combination of FH series bio-based polyols, and high molecular weight and reactivity makes FH-32090 useful in the preparation of flexible molded foams. FH-32090 has been formulated with a specialty inhibitor package which is not recommended for flexible slabstock foam production.
Typical properties
Appearance | clear liquid |
Hydroxyl number, mg KOH/g | 26-30 |
Water wt.% maximum | 0.05 |
Acid number, maximum | 0.01 |
Na & K, ppm maximum | 5 |
Color, APHA maximum | 30 |
Nominal functionality | 3 |
Nominal molecular weight | 4800 |
Density, lbs/gal @ 25°C | 8.52 |
Density, lbs/gal @ 38°C | 8.44 |
Density, lbs/gal @ 60°C | 8.30 |
Viscosity, cps @ 25°C | 1150 |
Viscosity, cps @ 38°C | 600 |
Viscosity, cps @ 60°C | 250 |
Application
Foam
Storage and transportation
FH-32090 should be stored under dry conditions below 60°C.
200kg nonreturnable steel drums, 1000kg IBC tank made from HWHDPE.
Attention
These products can be used to prepare a variety of polyurethane products. Polyurethanes are organic materials and must be considered combustible.
This product is sold solely for use by industrial institutions. Refer to our Safety Data Sheet (SDS) regarding regulatory compliance, safety, hazards, spill procedures and disposal of this product. An SDS as well as additional information on Hug Chem polyols may be obtained by contacting us.
