FH-216081 is a polyethylene adipate with a molecular weight of 2,000. Combined with Hug Chem FH series bio-based polyols, it is often used in high property polyurethane elastomers, elastomeric coatings and binders applications.
Typical properties
Appearance | Slightly yellow |
Hydroxyl number, mg KOH/g | 52.0 – 58.0 |
Water wt.% maximum | 0.05 |
Acid number, maximum | 0.9 |
Color, APHA maximum | 100 |
Nominal functionality | 2 |
Viscosity, cps @ 60°C | 950 – 1200 |
Density, lbs/gal @ 25°C | 10.7 |
Storage and transportation
FH-216081 containers should be kept tightly closed away from moisture and foreign materials. It is hygroscopic and tends to absorb water which may adversely affect processing. Use of a dry nitrogen blanket for partial drums is recommended. Storage temperatures should be maintained at room temperature or higher, not to exceed 75°C.
200kg nonreturnable steel drums, 1000kg IBC tank made from HWHDPE.
Attention
These products can be used to prepare a variety of polyurethane products. Polyurethanes are organic materials and must be considered combustible.
This product is sold solely for use by industrial institutions. Refer to our Safety Data Sheet (SDS) regarding regulatory compliance, safety, hazards, spill procedures and disposal of this product. An SDS as well as additional information on Hug Chem polyols may be obtained by contacting us.
