FH-20760 is a high performance bio-based branched polyether/polyester polyol that is designed to be used in combination with isocyanates as a reactive component for 2-part polyurethane coatings. FH-20760 is suitable for UV-stable and weather-resistant coatings, and shows particular water repellency, which results in less sensitivity to moisture while curing. A high Tg also imparts high hardness in the final coating.
Benefits
Hydrolysis stable
Hydrophobic
Extremely high Tg-polyol
High Shore D hardness (D~90)
High renewable raw material content
High saponification stable
Excellent chemical resistance
Product highlights
• Bio-based
• 100% system
• Solvent-Free
• UV-Stable
• Weather-Resistant
• High Shore D Hardness (D ~ 90)
• Hydrophobic
• Excellent chemical resistance
• Hydrolysis stable
• High heat resistance
• Extremely high Tg
Properties
Physical form | Low viscous, yellow liquid |
Water content | ≤ 0.2 % |
Acid number | ≤ 2.0 mg KOH/g |
Hydroxyl number | 370 – 410 mg KOH/g |
Viscosity, 20 °C | 1,500 – 3,000 mPaꞏs |
Density, 20 °C | 1.00 – 1.04 g/cm3 |
Application
In combination with Polymer MDI FH-20760 can be used for the production of 2 pack coating and casting materials. In combination with an aliphatic, HDI-based polyisocyanate, FH-20760 is suitable for the production of UV-stable and weathering resistant coatings.
In addition, FH-20760 is strongly water repellent, which results in less sensitivity to moisture while curing.
