FH-S1360 polyol is a clear, light colored, low viscosity, sucrose/glycerine polyol. The medium functionality polyol, when combined with bio based polyols, and suitable flame retardants, yields foams having low smoke and good char-forming characteristics in the ASTM E-84 tunnel test. FH-S1360 has excellent compatibility with blowing agents and isocyanates for high index and isocyanurate foams, as well as appliance, high density and general purpose foam formulations.
Typical properties
Appearance | Slightly yellow liquid |
Hydroxyl number, mg KOH/g | 350 – 375 |
Water wt.% maximum | 0.10 |
Acid number, maximum | 0.030 |
Na & K, ppm maximum | 15 |
Color, APHA maximum | 80 |
Nominal functionality | 4 |
Nominal molecular weight | 700 |
Density, lbs/gal @ 25°C | 9.00 |
Specific gravity @ 25°C | 1.08 |
Specific gravity @ 40°C | 1.06 |
Specific gravity @ 60°C | 1.05 |
Viscosity, cps @ 25°C | 3500 |
Viscosity, cps @ 40°C | 1300 |
Viscosity, cps @ 60°C | 300 |
Application
Foam
Storage and transportation
FH-S1360 should be stored under dry conditions below 60°C.
200kg nonreturnable steel drums, 1000kg IBC tank made from HWHDPE.
Attention
These products can be used to prepare a variety of polyurethane products. Polyurethanes are organic materials and must be considered combustible.
This product is sold solely for use by industrial institutions. Refer to our Safety Data Sheet (SDS) regarding regulatory compliance, safety, hazards, spill procedures and disposal of this product. An SDS as well as additional information on Hug Chem polyols may be obtained by contacting us.
