FH-201092 is a high performance bio branched polyether/polyester polyol that is designed to be used in combination with isocyanates as a reactive component for 2-part polyurethane coatings. FH-201092 brings low viscosity and hydrophobicity to the coating formulation while imparting self-leveling characteristics, high hardness and elasticity to the coating.
Benefits
Low viscosity high performance polyol
Excellent pigment wetting (esp. TiO2)
Extremely hydrophobic
Good bonding properties
Hardness similar to epoxy systems
High renewable raw material content
Product highlights
• Bio-based
• 100% system
• Solvent-Free
• Low viscosity
• Extremely hydrophobic
• Hardness similar to epoxy systems
• Hard elastic performance
• Good self-leveling properties
Properties
Physical form | Low viscous, yellow liquid |
Water content | ≤ 0.2 % |
Acid number | ≤ 2.0 mg KOH/g |
Hydroxyl number | 268 – 298 mg KOH/g |
Viscosity, 20 °C | 650 – 950 mPaꞏs |
Density, 20 °C | 0.97 – 1.02 g/cm3 |
Application
In combination with Polymer MDI FH-201092 can be used to produce 2-pack PU coatings and adhesives. Due to the hydrophobic properties and its low viscosity, this material is therefore eminently suitable for electro potting compounds.
In addition, FH-201092 shows particular water repellency, which results in less sensitivity to moisture while curing.
