close
Choose Your Site
Global
Social Media
| Quantity: | |
|---|---|
FH-31135 polyol is a nominal 1500 molecular weight triol. Combined with Hug Chem FH series bio-based polyols, FH-31135 has been prepared for applications in flexible slabstock foams and polyurethane adhesive and sealants applications.
Typical properties
Appearance | clear liquid |
Hydroxyl number, mg KOH/g | 107-117 |
Water wt.% maximum | 0.05 |
Acid number, maximum | 0.01 |
Na & K, ppm maximum | 5 |
Color, APHA maximum | 30 |
Nominal functionality | 3 |
Nominal molecular weight | 1500 |
Density, lbs/gal @ 25°C | 8.44 |
Density, lbs/gal @ 35°C | 8.38 |
Density, lbs/gal @ 45°C | 8.31 |
Viscosity, cps @ 25°C | 305 |
Viscosity, cps @ 35°C | 167 |
Viscosity, cps @ 45°C | 102 |
Application
Adhesive
Stockslab foam
Sealant
Storage and transportation
FH-31135 should be stored under dry conditions below 60°C.
200kg nonreturnable steel drums, 1000kg IBC tank made from HWHDPE.
Attention
These products can be used to prepare a variety of polyurethane products. Polyurethanes are organic materials and must be considered combustible.
This product is sold solely for use by industrial institutions. Refer to our Safety Data Sheet (SDS) regarding regulatory compliance, safety, hazards, spill procedures and disposal of this product. An SDS as well as additional information on Hug Chem polyols may be obtained by contacting us.
