FH-502047 is a linear polyester polyol that is suitable for combination with polyisocyanates in the formulation of solvent-borne adhesives and coatings.
Applications
FH-502047 can be combined with various polyisocyanate products to formulate adhesives and coatings for many different materials, e.g. wood, metal and plastic. FH-502047 is suitable for use in the formulation of reactive adhesives with a low solvent content.
FH-502047 can be thinned with solvents such as esters, ketones and aromatics. Only grade solvents should be used (< 0.05 % by wt. water).
Typical properties
Appearance | Viscous, slightly yellow liquid |
Hydroxyl number, mg KOH/g | 50-60 |
Color value Hazen | ≤ 250 |
Acid number, mg KOH/g | ≤ 1.0 |
Water wt.% | ≤ 0.05 |
Viscosity, mPa.s @ 75°C | 5000-9000 |
Storage
Storage in original sealed Hug Chem container.
Recommended storage temperature: 15 - 30 °C.
Protect from moisture, heat and foreign material.
General information: The product is slightly hygroscopic.
The shelf life is twelve months after receipt of material by customer, when stored in sealed original containers under conditions stated above.
Health and safety information
Appropriate literature has been assembled which provides information concerning the health and safety precautions that must be observed when handling this product. Before working with this product, you must read and become familiar with the available information on its risks, proper use, and handling. This cannot be overemphasized. Information is available in several forms, e.g., safety data sheets and product labels. For further information contact Service of Hug Chem.
Packaging
200 kg steel drums, 1000 kg IBC
